AeroCaster: Is it possible to adding reverb only to the mic audio?
Yes. AeroCaster LIVE App Ver. 1.5.6 or later and VRC-01 System Program Ver. 1.05 or later can enable/disable the reverb applied to the LINE IN audio. Please update the AeroCaster LIVE app and VRC-01 to the latest version.
To apply reverb only to the audio from the mic (MIC 1, MIC 2, the built-in mic, and the headset mic) without adding reverb to the audio from the LINE IN jack, change the settings in the AeroCaster LIVE app or the VRC-01 unit. See "AeroCaster LIVE Owner's Manual - Adding Reverb Only to the Mic Audio" and "AeroCaster VRC-01 Owner's Manual - Adding Reverb Only to the Mic Audio" for details on the operating procedures.
- When the loopback function is ON, the reverb settings are applied to the audio from the LINE IN jack and the DEVICE port.
- The reverb settings are saved by the app. When using the VRC-01 alone or as an audio interface, you need to make the settings each time you turn on the unit.