VC-1-DMX: The lighting isn’t turning on, even though the DMX channel settings are correct.
If the lighting does not turn on even though you set the DMX channel for VC-1-DMX correctly, please check the following points.
-
The Master Dimmer might have been turned all the way down.
Increase the Master Dimmer value.
See "Master Dimmer" in the "Using the VC-1-DMX Configuration Software" for details.
-
Switch 8 of the SETTING switch might have been turned “ON”.
When switch 8 is “ON”, the lighting turns on when audio input is received (and the lighting does not turn on when there is no audio input). Turn switch 8 to “OFF”, or try inputting an audio signal.
-
The light is not in DMX mode.
Check the settings on the light and light's instruction manual and confirm it is in its DMX mode.