If the other party in the conference can’t hear the audio input signal from a mic connected to the UVC-02, or if they can’t hear the audio that’s playing back on the computer used for livestreaming, check the following points.

• Settings for each knob
  Raise the level on the [HDMI] , [AUX], [MIC] and [H.MIC] knobs, and check whether the indicator for each knob lights up when audio is input.

• [AUDIO OUT] button (if the HDMI or AUX audio isn’t heard by the other party)
  To output HDMI and AUX audio, press the [AUDIO OUT] button to make it light up.

• [TALK] button (if the MIC or H.MIC audio isn’t heard by the other party)
  To output audio from the mic and headset mic, press [TALK] to make it light up.
  If the [TALK] button mode is set to “PUSH TO TALK” or “PUSH TO MUTE”, the audio from the mic is only outputted or muted while the [TALK] button is being pressed.

Use the UVC-02 Setup Tool for the following.

• USB OUT volume and switch
  See the related Q&A, “I can’t send the UVC-02 audio to my computer.”.

• Input/output sliders
  Drag these sliders with your mouse to adjust the levels for SFX1, SFX2, USB IN and USB OUT.