UVC-02: I can’t hear the input audio from the computer.
If you can’t hear the audio input to the UVC-02 from your computer, check the various settings.
-
Connect your computer on which the UVC-02 Setup Tool is installed to the UVC-02 by using the included USB cable. The
- UVC-02 Setup Tool launches automatically.
-
Click the [SYSTEM] tab to open the SYSTEM SETTINGS, and raise the USB IN input/output slider.
-
Click the [AUDIO] tab to open the AUDIO ROUTING SETTINGS, and set the output switch of signal going “To MONITOR/PHONES” for USB IN to the ON position.
