A PHP Error was encountered

Severity: Notice

Message: Undefined index: /support/knowledge_base/

Filename: controllers/knowledge_base.php

Line Number: 89

A PHP Error was encountered

Severity: Notice

Message: Trying to get property of non-object

Filename: controllers/knowledge_base.php

Line Number: 94

A PHP Error was encountered

Severity: Notice

Message: Trying to get property of non-object

Filename: controllers/knowledge_base.php

Line Number: 95

A PHP Error was encountered

Severity: Notice

Message: Trying to get property of non-object

Filename: controllers/knowledge_base.php

Line Number: 96

A PHP Error was encountered

Severity: Warning

Message: curl_setopt(): CURLOPT_FOLLOWLOCATION cannot be activated when safe_mode is enabled or an open_basedir is set

Filename: models/zd_model.php

Line Number: 38

A PHP Error was encountered

Severity: Notice

Message: Trying to get property of non-object

Filename: controllers/knowledge_base.php

Line Number: 108

A PHP Error was encountered

Severity: Notice

Message: Trying to get property of non-object

Filename: controllers/knowledge_base.php

Line Number: 109

欢迎访问Roland ProAV中文网站 - 支持 - - V-02HD MK II: The INPUT video and preset memories change by themselves.
AS

V-02HD MK II: The INPUT video and preset memories change by themselves.

Check the AUTO SWITCHING settings when the video inputted to the V-02HD MKII or the preset memory changes.

Follow the steps below.

  1. Press the [MENU] button to display the menu screen.
  2. Turn the [VALUE] knob to select “14:SYSTEM,” and press the [VALUE] knob.
  3. Turn the [VALUE] knob to display page 3 (3/5).
  4. Check the “AUTO SWITCHING” settings.
    - When the setting is “ON,” the unit automatically switches to the target that’s selected in TYPE.
    • INPUT SCAN: Switches automatically between INPUT 1 and INPUT 2 video.
    • PRESET MEMORY SCAN: This automatically switches between preset memories 1–8.
  5. If you aren’t using automatic switching, turn the [VALUE] knob to select AUTO SWITCHING, and turn the [VALUE] knob to set the value to “OFF.”
  6. Press the [VALUE] knob.
  7. Press the [MENU] button several times to close the menu.

支持

Quick Links