Yes. EDID is data that is transmitted from the unit to the source device when the unit is connected to a source device.

Using the factory settings, the EDID assignment for the HDMI IN 5–8 connectors is “INTERNAL” (so that EDID values of all formats that can be input are sent). To specify an input format of your choice, change the setting of the EDID information being sent so that it matches the incoming video signal.

Follow the steps below.

1. [MENU] button -> “VIDEO INPUT” -> “INPUT 5 (SCALER)”– “INPUT 8 (SCALER)” -> select “EDID,” and press the [VALUE] knob.
2. Use the [VALUE] knob to set the input format (the EDID information to send), and press the [VALUE] knob to confirm.
   - A change in the setting is not applied until you press the [VALUE] knob to confirm.
   

   Value

   INTERNAL (EDID information for all inputtable formats is sent.)
   SXGA+ (1400 x 1050)	UXGA (1600 x 1200)
   SVGA (800 x 600)	WUXGA (1920 x 1200)
   XGA (1024 x 768)	720p
   WXGA (1280 x 800)	1080i
   FWXGA (1366 x 768)	1080p
   SXGA (1280 x 1024)

3. Press the [MENU] button to close the menu.