Up to 16 still images can be imported from a USB flash drive and saved to this unit. Once imported, you can assign the still images to a desired channel, even after disconnecting the USB flash drive.

- Still images saved on this unit remain in memory even after the power is turned off.
- Save the importable still image files to the root directory of a USB flash drive that was formatted using the V-160HD.
- Still images cannot be scaled. In advance, you must prepare still images of the resolution that is appropriate for your output format.

Follow the steps below.

1. Connect the USB flash drive containing the still image to the USB MEMORY port.
2. [MENU] button ⇒ “STILL IMAGE” ⇒ select “LOAD FROM USB MEMORY,” and press the [VALUE] knob.
   - A “ * ” symbol is displayed for memory where a still image is already saved.
3. Use the [VALUE] knob to select the loading destination for the still image (STILL 1–16), and press the [VALUE] knob.
   - A list of the still images in the USB flash drive is shown.
4. Use the [VALUE] knob to select the still image file you want to load, and press the [VALUE] knob.
   - A confirmation message appears.
   - If you want to cancel the operation, press the [EXIT] button.
5. Use the [VALUE] knob to select “YES,” and press the [VALUE] knob.
   - The still image is imported into this unit, and “COMPLETE” is shown when the import is finished.
6. Press the [MENU] button to close the menu.