Yes. You can use the voice changer to change the pitch or tonal quality of the audio input from the AUDIO IN 1, 2 connectors.

Follow the steps below.

1. [MENU] button -> “AUDIO INPUT” -> “AUDIO INPUT 1”– “AUDIO INPUT 2” -> select “VOICE CHANGER,” and press the [VALUE] knob.
2. Use the [VALUE] knob to select “ON,” and press the [VALUE] knob.
   - This turns the voice changer on.
3. Use the [VALUE] knob to select a menu item, and press the [VALUE] knob.
   

   Menu item

   Explanation

   PITCH	Adjusts the pitch of the voice in semitone steps. A setting of “0” is the original pitch.
   FORMANT	Adjusts the character (formant) of the voice. Settings in the negative (–) direction produce a more masculine vocal character, and settings in the positive (+) direction produce a more feminine vocal character. A setting of “0” is the original voice.
   ROBOT	When this is “ON,” the voice is held at a fixed pitch, creating a mechanical robot-like impression.
   MIX	Adjusts the balance between the unprocessed voice (0) and the voice processed by the effect (100).

4. Use the [VALUE] knob to change the value, and then press the [VALUE] knob.
5. Press the [MENU] button to close the menu.