Connecting your Roland V-80HD video switcher to the Yamaha DM3 audio mixer can be done over network with a single LAN cable. This connection can be used to control your embedded audio using your DM3 faders. You can also use the assignable pads or macros on the V-80HD to recall scenes on the DM3. This can be connected directly, or through a network switch or router.

Connecting via LAN:

After connecting your 2 devices, you will want to go to your network settings and ensure that your 2 devices are on the same network. this can be done either manually or through DHCP (automatic) connection. Once your 2 devices are on the same network, go to your network settings on your V-80HD and scroll down to "Yamaha Mixer Control." This is where you'll enter the IP address to the DM3 on your V-80HD.

Assigning audio channels:

Once your V-80HD detects the DM3, scroll down to the selected audio source you want to assign to a fader. Select which channel you would like your audio channel to be assigned. Once selected, your fader should mirror your audio level source.

Changing DM3 Scenes using Assignable Pads

 

Changing DM3 Scenes using Macros: