A PHP Error was encountered

Severity: Notice

Message: Undefined index: /support/knowledge_base/

Filename: controllers/knowledge_base.php

Line Number: 89

A PHP Error was encountered

Severity: Notice

Message: Trying to get property of non-object

Filename: controllers/knowledge_base.php

Line Number: 94

A PHP Error was encountered

Severity: Notice

Message: Trying to get property of non-object

Filename: controllers/knowledge_base.php

Line Number: 95

A PHP Error was encountered

Severity: Notice

Message: Trying to get property of non-object

Filename: controllers/knowledge_base.php

Line Number: 96

A PHP Error was encountered

Severity: Warning

Message: curl_setopt(): CURLOPT_FOLLOWLOCATION cannot be activated when safe_mode is enabled or an open_basedir is set

Filename: models/zd_model.php

Line Number: 38

A PHP Error was encountered

Severity: Notice

Message: Trying to get property of non-object

Filename: controllers/knowledge_base.php

Line Number: 108

A PHP Error was encountered

Severity: Notice

Message: Trying to get property of non-object

Filename: controllers/knowledge_base.php

Line Number: 109

欢迎访问Roland ProAV中文网站 - 支持 - - VR-1HD: How to Set Up an Audio Mix Minus
AS

VR-1HD: How to Set Up an Audio Mix Minus

More details for each step are in the Reference Manual, page numbers are referenced below.

 

A mix-minus allows you to create an alternate audio mix where one or more sources are removed from the main mix.

 

This is done by setting a video output's audio bus assignment to AUX and then muting the AUX Send for any audio channel you want to remove from the AUX audio mix.

 

In this example, we set up the USB Streaming Output for a mix-minus.

 

First, go to Menu > Audio Output > AUX Bus, and change the Level to 0.0dB.

Note: If you push in the Value knob while turning it, the value will change faster.

(Reference Manual, page 27)

Next, press the Menu button once to go back a page and enter the Bus Select menu, and change USB Stream to AUX.

(Reference Manual, page 27)

mceclip0.png

Finally, go the Menu > Audio Input and set the AUX Send level to -INF if you want to remove it from the AUX audio mix or 0.0dB if you want it to add it to the AUX audio mix.

(Reference Manual, page 27)

mceclip2.png

 

The AUX Send value is post-fader, which means that the faders you use to adjust the Main audio mix will also affect the AUX audio mix.

So, if you turn Mic 1 all the way down and mute it, it will be muted in the AUX Mix as well.

Note: The AUX Send value therefore either lowers, passes-through, or raises the level it receives from the audio channel's fader. In most cases, you will set the AUX Send value to either -INF or 0.0dB.​

支持

Quick Links