V-60HD: How to Set Up and Use Audio Follow Video in your Audio Mix
The following information is from the V-60HD Owner's Manual. If you would like more information on this topic, please contact support via Roland Backstage.
You can associate audio with a video switch so that when the video is switched, the specified audio alone is output automatically, and other audio is automatically muted.
NOTE: When the Audio Follow feature is turned on, switching between audio output and muting is carried out automatically. The positions of the controls used to adjust the volume level do not change automatically.
- Follow the procedure in “Adjusting the Volume Level” to adjust to the volume level you want to output.
- Select the [MENU] button0“AUDIO FOLLOW.”
- Select the video channel you want to use with Audio Follow, then use the [VALUE] knob to set it to “ON.”
Value Explanation ON This enables the Audio Follow feature.
Muting is performed automatically when video on another channel is output.OFF This disables the Audio Follow feature. - Press the [VALUE] knob to apply the setting.
- Press the [MENU] button to quit the menu.
- Switch the video.
On video channels where Audio Follow is on, audio is automatically muted when video on other channels is output.
MEMO: You can check the Audio Follow settings by examining the channel section of the multi-view monitor. Video channels for which Audio Follow is turned on are displayed together with an “A.F” symbol.
Applying audio follow to AUDIO IN 1–5/6
- Select the [MENU] button0“AUDIO FOLLOW.”
- From among “AUDIO IN 1” through “AUDIO IN 5/6,” select the input audio you want to use with Audio Follow.
- Use the [VALUE] knob to specify the video channel to use with Audio Follow.
Value Explanation SDI IN 1–4
HDMI IN 5
HDMI/RGB IN 6
STILL/BKG IN 7 and 8This sets the video channel to interlink with input audio using Audio Follow.
Audio from AUDIO IN 1–5/6 is muted out for video channels other than what you specified.OFF This assigns no video channel to Audio Follow. - Press the [VALUE] knob to apply the setting.
- Press the [MENU] button to quit the menu.