This is a general troubleshooting guide for video connections on Roland Switchers.

For more product-pecific troubleshooting guides, please see the following:

• V-1HD: Troubleshooting HDMI Inputs
• V-1SDI: Troubleshooting Only HDMI Input 4 Working
• V-60HD: Troubleshooting Only HDMI Inputs Working
  
• VR-4HD: Troubleshooting Only HDMI Input 4 Working

 

 

No Video from an Input Source

If you have no video from one of your input sources, try the following:

• Connect the camera to a TV via HDMI to verify signal
• Restart the camera
• Try a different HDMI cable
• Try the shortest possible HDMI cable directly between camera and switcher

 

• Roland Switchers: How to Setup Clean HDMI Output on your Camera

 

 

Unit Will Not Boot, No Video from any Input Sources

 

Unplug all HDMI cables and power it on, see if the buttons work.

 

Plug a camera directly into a TV to confirm that it works, then unplug it.

 

Then, plug the Monitor HDMI output to a TV, and press the menu button to see if it appears on the TV.

 

Note: If using a directional HDMI cable, make sure the arrows on the connectors are going the right way.

• Arrows should point toward an input, and away from an output

 

Then, plug in a camera to HDMI input 1, make sure input 1 is selected, and see if video appears.

 

If not, go to Menu > Video Input > Input 1 > Input Status, and let me know what it says.