Here’s how to load a video from your storage media into this unit. You can play back the videos that you’ve loaded, and output them in the same way as with regular video signals.

1. Save the video in the root directory of the SD card or USB flash drive.
2. Insert the SD card into the SDXC card slot.
   - * When using a USB flash drive, connect the USB flash drive to the USB HOST port.
3. [MENU] button > select “VIDEO PLAYER”, and press the [VALUE] knob.
   - The Video Player setup screen appears.
   
   
   
   
4. Touch the filename in the top right-hand corner of the screen.
   
   - “Demo.mp4” comes preloaded with the factory settings.
   A list of the videos in the storage is shown.
   
   - Touch a folder to move inside it.
   - Touch <PARENT FOLDER> to move up one level in the folder hierarchy.
   - Use the “SD CARD” or “USB MEMORY” selector at the top of the screen to switch between the storage media to load from.
   
5. Touch the filename of the video you want to load.
   A confirmation message appears.
   
   Touch <PREVIEW> to play back the video.
   * If you decide to cancel, press the [EXIT] button.
6. Use the [VALUE] knob to select “OK”, and then press the [VALUE] knob.
   - The video is imported into the unit. When the operation is finished, the message “COMPLETED” appears.
   * If the file size of the video is large, it may take some time for the video to load.
7. Press the [MENU] button to close the menu.

NOTE

• The video is scaled to the output format size.
• When using a SD card or USB flash drive for the first time, you must format it using the VR-6HD.
• Never turn off the power or remove the SD card or USB flash drive while the message “PROCESSING...” is shown.
• Depending on the SD card or USB flash drive, it may take some time to be recognized.