There are three types of view modes are available for the V-1SDI’s preview output. You can set the view mode individually for the PVW connector (SDI) and the MULTI-VIEW connector (HDMI).

1. Press and hold the [SETUP] button (for 2 seconds or longer) to display the SETUP menu.
2. Navigate to page 3/16 "VIDEO OUTPUT"
3. Select “PVW ASSIGN” (PVW connector) or “OUTPUT ASSIGN” (MULTI-VIEW connector).
   
4. Use the A/B fader to set the view mode.
5. You have 3 choices:
   
   MULTIVIEW: This displays the incoming video on channels 1 through 4 as a four-way split screen. The video is displayed with a colored border that is interlinked with the selected [A-1]through [A-4] or [B-1] through [B-4] button. A red border for video currently being output and a green border for video to be output next. It also displays the audio level meter at the bottom of the screen only from the MULTI-VIEW output HDMI connector.
   OUTPUT: This displays the video currently being output.
   PREVIEW: This displays the video to be output next.
   **NOTE** Labels for identifying SDI and HDMI in all view modes are displayed only for output from the MULTI-VIEW connector (HDMI).
   
   
6. Press the [SETUP] or [AUDIO] button to quit the menu.