You can adjust the output video to match the specifications of the equipment receiving the output from the V-1SDI. 

1. Press and hold the [SETUP] button (for 2 seconds or longer) to display the SETUP menu.
   
   
   
2. Then select from the following menu items:
            VIDEO OUTPUT (page 3/16 of Menu)
• "3G-SDI MAPPING" This sets the mapping structure for 3G-SDI output Level A or B
• "COLOR SPACE" This sets the color space for HDMI output.
• "DVI-D/HDMI" This sets the output mode for HDMI output.
  VIDEO OUTPUT (page 4/16 of Menu)
• "CONTRAST"* This adjusts the contrast.
• "SATURATION"* This adjusts the saturation.
• "BRIGHTNESS"* This adjusts the brightness.
  *These settings are shared by HDMI output (the MULTI-VIEW connector) and SDI output (the PGM and PVW connectors).
  
  
3. Use the A/B fader to adjust the output video.
   * The settings for the following menu items are applied by pressing the [DSK] () button. If 1 seconds elapse without applying the setting, the setting returns to its original value, with no change applied.
   
   
4. Press the [SETUP] or [AUDIO] button to quit the menu.