R-4 Pro: The unit does not automatically jam to external timecode for each recording
The R-4 Pro does not automatically jam to an external timecode source each time recording starts.
To synchronize the R-4 Pro with an external device (such as a camera), you must manually perform a Jam EXT operation. This updates the R-4 Pro’s internal timecode so that it matches the incoming external timecode.
Before performing this operation, make sure that the external timecode signal is connected to the TIMECODE connector.
Procedure
- Press [SYSTEM].
- Select 6 Time Code.
- Select Set Int TC.
- Select Jam EXT.
For details, refer to “Synchronize to an external timecode source” in the R-4 Pro Owner’s Manual.