A PHP Error was encountered

Severity: Notice

Message: Undefined index: /support/knowledge_base/

Filename: controllers/knowledge_base.php

Line Number: 89

A PHP Error was encountered

Severity: Notice

Message: Trying to get property of non-object

Filename: controllers/knowledge_base.php

Line Number: 94

A PHP Error was encountered

Severity: Notice

Message: Trying to get property of non-object

Filename: controllers/knowledge_base.php

Line Number: 95

A PHP Error was encountered

Severity: Notice

Message: Trying to get property of non-object

Filename: controllers/knowledge_base.php

Line Number: 96

A PHP Error was encountered

Severity: Warning

Message: curl_setopt(): CURLOPT_FOLLOWLOCATION cannot be activated when safe_mode is enabled or an open_basedir is set

Filename: models/zd_model.php

Line Number: 38

A PHP Error was encountered

Severity: Notice

Message: Trying to get property of non-object

Filename: controllers/knowledge_base.php

Line Number: 108

A PHP Error was encountered

Severity: Notice

Message: Trying to get property of non-object

Filename: controllers/knowledge_base.php

Line Number: 109

欢迎访问Roland ProAV中文网站 - 支持 - - VC-1-SC: Troubleshooting / Check settings
AS

VC-1-SC: Troubleshooting / Check settings

Make sure that the mode switches are matching those of the units that are working and test them with the same signals in/out that you are using with the three that are working. Let me know if you still have problems after verifying that the mode switches are matching and sources too.

Are you using the software to change the settings for the units? it's possible that you may need to take a look at the settings through the software to make sure they're matching.

Go here to download the remote control software and install it and check the settings. Also if the unit is not up to date you can update the firmware.

http://proav.roland.com/products/vc-1-sc/downloads/

支持

Quick Links