VM-3100: Aux Send Routing
Use the following procedure to send a channels signal out the VM-3100s Aux
Send (Outputs 1 and 2):
1) Use the SELECT button to select a channel.
2) Use the CURSOR [<, >, ^, or v] buttons to select 'AUX.'
3) Use the VALUE dial to place a check mark in the box. The channel will now
be heard out of the Aux Send.
Send (Outputs 1 and 2):
1) Use the SELECT button to select a channel.
2) Use the CURSOR [<, >, ^, or v] buttons to select 'AUX.'
3) Use the VALUE dial to place a check mark in the box. The channel will now
be heard out of the Aux Send.