You can change the program numbers that are called up when incoming MIDI
program change messages are received. Use the following procedure to remap
program change numbers:

1) Press SYSTEM.
2) Use the VALUE dial or the UP/DOWN buttons to display "7:Prg Change Map."
3) Press PAGE so it is not lit.
4) Use the VALUE dial to select the desired "MIDI# / Prg #" number display.
5) Use the UP/DOWN buttons to change the "Prg #" number.
6) Repeat Steps 4 and 5 for any additional changes.
7) Press SYSTEM or EXIT to return to the Play mode.