VM-3100PRO: Speaker Modeling -- Activating and Selecting Different Speaker Types
1. Press EFFECTS2.
NOTE: Speaker Modeling can only be accessed from EFFECTS2.
2. Rotate the VALUE dial until patch "P99 SPM: SP Flat" appears in the display.
3. Press ENTER/YES. The patch is now selected.
4. Press F1-F4 ON/OFF.
5. Press F3 [VALUE].
6. Press ENTER/YES.
7. Use the DOWN CURSOR to move to "Model".
8. Rotate the VALUE dial to choose the type of speaker simulation that you want to use.
9. Use the DOWN CURSOR to move to "OutSp."
10. Rotate the VALUE dial to choose the monitor type that you are using.
NOTE: Speaker Modeling has been calibrated so that the widest choice of speaker modeling will be obtained when using the DS-90 digital monitors. Other types of Roland monitors may be selected for use with the VM-3100Pro, however, the available choices of speaker modeling will vary for monitors other than the DS-90s.
11. Use the DOWN CURSOR to move to "Phase."
12. Rotate the VALUE dial to specify the phase of the speakers.
13. Press LEVEL METER to return to the main mixer display when you are done.