Use the following procedure to load EQ settings from the EQ library:

1) Press [F1-F4 ON/OFF] so it is lit.
2) Press F4 [EQ] to display the "EQ" screen.
3) Press [SELECT] for the desired channel.
4) Press [F1-F4 ON/OFF] so it is lit.
5) Press F1 [LOAD].
6) Use the VALUE dial to select an EQ library memory location.

NOTE: Press F1 [PRE] or [USER] to go to the beginning of the preset or user
libraries.

7) Press [ENTER/YES] twice.