To erase the entire contents of the PC card, use the following procedure:

1. Press MODE. The MODE indicator will light.

2. Use the SELECT dial to select “3.1 Erase Card.”

3. Use the SELECT dial to select the PC card (A/B) you wish to erase.

4. Press the SELECT dial.

5. Use the SELECT dial to select “Execute.” If you select “Cancel,” the Erase Card operation will be canceled.

6. If you press ENTER, the Erase Card operation will begin.

7. When the Erase Card operation is completed, the display will change to indicate this.

8. Press MODE. The MODE indicator will go off.