You can save up to 16 still images to the internal memory of the VR-120HD that you’ve loaded from an SD card or a USB flash drive. You can assign the still images to channels once you’ve loaded them, even after disconnecting the SD card or USB flash drive.

* Still images saved on this unit remain in memory even after the power is turned off.
* Save the still image files (in the correct format for importing) to the root directory of an SD card or USB flash drive that was formatted using the VR-120HD.
* You can also capture a still image from the input/output video and save it to this unit. See “Capturing a Still Image from Input/Output Video” in the VR-120HD Reference Manual for details.

Follow the steps below.

1. Save the still image in the root directory of the SD card or USB flash drive.
2. Insert the SD card into the SDXC card slot.
   * When using a USB flash drive, connect the USB flash drive to the USB HOST port.
3. [MENU] button -> “Still Image” -> “Load From Storage” -> select “Still Image” and press the [VALUE] knob.
4. Use the [VALUE] knob to select where to load the still image (Still 1–16), and press the [VALUE] knob.
5. Press the [EXIT] button to return to the previous screen.
6. Use the [VALUE] knob to select “Load”, and press the [VALUE] knob.
   A list of the still images on the storage media is shown.
7. Touch the filename of the still image you want to load.
   A confirmation message appears.
8. Use the [VALUE] knob to select “OK”, and press the [VALUE] knob.
   The still image is loaded into the unit. When it is finished, the message “Completed” appears.
9. Press the [MENU] button to close the menu.