The SDI OUT connectors on the V-60HD accommodate eight channels of embedded audio. In addition to two channels for master out (or the AUX bus), you can separate the six discrete channels of analog input audio (AUDIO IN 1 through 5/6) and add them to SDI video. To view how the audio is separated go here.

As a Backup for Visual or Sound Recording...
Digital audio is extracted from the SDI embedded audio one channel at a time, so after visual recording or sound recording, you can edit the audio channel by channel.

For Multilingual Support...
Taking multilingual narration or other such audio, making it embedded audio and adding it to SDI video lets you later extract and use the digital audio for the required language.

1. Select the [MENU] button
2. Use the [VALUE] knob to select “AUDIO EMBEDDED.”
   
   
   
   
3. From among “AUDIO IN 1” through “AUDIO IN 5/6,” select the input audio you want to send to the SDI embedded-audio channel.
   
   
   
   
4. Use the [VALUE] knob to set the audio type to “DRY” or “WET.”
   
   

   VALUE	EXPLANATION
   OFF	No audio is sent.
   DRY	This sends the source audio with no effects applied.
   WET	This sends the effect-applied audio.

5. Press the [VALUE] knob to apply the setting. (Repeat steps 3 through 5 as needed)
   
   
6. Select “SDI OUT 1 AUDIO” or “SDI OUT 2 AUDIO,”
   
   
7. Use the [VALUE] knob to set it to “CH1–8.”
   
   
   Audio containing channels 3 to 8 of embedded audio is output from the SDI OUT connector set to “CH1–8.”
   
   
8. Press the [VALUE] knob to apply the setting.
   
   
9. Press the [MENU] button to quit the menu.