The V-60HD supports many video source devices, but DVD/Blu-Ray players and Streaming Boxes require HDCP (High-bandwidth Digital Content Protection) to be turned on in the system settings. Once enabled, the signal will pass through.

But there are exceptions. If the V-60HD's outputs are connected to a recording or streaming device, or a converter that outputs SDI or Analog video, that device will block the DVD/Blu-Ray player's HDCP copy-protected signal passing through the switcher.

On the V-60HD, turning on HDCP will also disable the SDI outputs.

1. Press the [MENU] button
2. Use the Value knob to select SYSTEM
3. Press <ENTER>
4. Use the Value knob to select HDCP
   
   
   
5. Press <ENTER> to select
   
   
6. Use the Value knob to set this to "ON"
   

   Value	Explanation
   ON	Copyright-protected (HDCP) video can be input.  HDCP is also added to the video that is output.
   OFF	Copyright-protected (HDCP) video cannot be input/   output

   
   
7. Press the [VALUE] once more to apply settings
   
8. Press the [MENU] button to quit the menu