Using the joystick and dial in the PinP section, you can output an enlarged or reduced view of the picture.


When using this feature, turn off Picture-in-Picture. Go to the PinP section and make sure the [ON] button is dark.

1. Output the video.
   Select the picture you want to display at enlarged or reduced size on PST/EFFECT button.
   
   
2. Turn on the enlarge/reduce feature.
   At the PinP section, make sure the [ON] button is dark, then press the [CONTROL] button. The [VIEW] indicator lights up.
   * When the [ON] button is dark, operating the [CONTROL] button does not make the [PinP] indicator light up. Only the [VIEW] indicator lights up or goes dark.
   
                               
3. Enlarge or reduce the picture.
   Turn the [SIZE] dial to resize the video source.
   * Turning the control all the way counterclockwise displays the picture at 10% reduced size. You can enlarge the display by up to 1,000% by turning clockwise.
   
                                
   
4. Change the portion that is displayed.
   Use the [POSITION] joystick to reposition.