VR-4HD: Returning Settings to the Factorydefault State (Factory Reset)
You can restore the VR-4HD to its factory default settings. This is useful if you’re troubleshooting or want to erase all custom settings.
Follow the steps below to perform a factory reset.
- Press the [SYSTEM SETUP] button to display the setup screen.
- Select <SYSTEM> to display the SYSTEM menu.
- Select <FACTORY RESET>.
- Select "FACTORY RESET".
A pop up box will appear prompting "ARE YOU SURE?" - Use the [VALUE] knob to select "OK" and Press down the [VALUE] knob to confirm.
A factory reset has been executed - Press the "SYSTEM SETUP" button several times to quit the setup screen.
Alternate Method:
- Hold down MONITOR/PVW INPUT, OUTPUT and TRANSITION CUT, and turn on the power, without letting go of the buttons.
Continue to hold down the three buttons until the Roland logo appears on the screen. - When "parameter initialize" / "OK" appears at the top of the LCD screen and the initial screen appears, the factory reset has finished.
- Turn off the power, wait a few seconds, and power on again.