The following Professional A/V products are compatible with Bitfocus Companion.

We do not directly support this software, all Roland modules are created and managed by the Companion community.

Additional tips for specific modules and models are located below this chart.

 

Product	Port Used	Companion Module	Companion Version
M200i, M300, M-380, M-400, M-480	RS-232	Use "M-5000"	2.0
M-5000	LAN	Yes	2.0
M-5000C	LAN	Use "M-5000"	2.0
P-20HD	LAN	Yes	3.0
SR-20HD	LAN	No, Command Set Pending	N/A
V-02HD, V-02HD MK II	N/A	Not Compatible	Not Compatible
V-1HD	N/A	Not Compatible	Not Compatible
V-1HD+	RS-232	Use "Generic: TCP Serial Port"	N/A
V-1SDI	RS-232	Use "Generic: TCP Serial Port"	N/A
V-4EX	N/A	Not Compatible	Not Compatible
V-60HD	LAN	Yes	3.0
V-160HD	LAN	Yes	2.0
V-600UHD	LAN	Yes	3.0
V-800HD, V-800HD MK II	RS-232	Use "Generic: TCP Serial Port"	N/A
V-1200HD	LAN	Yes	2.0
VR-1HD	N/A	Not Compatible	Not Compatible
VR-3EX	N/A	Not Compatible	Not Compatible
VR-4HD	RS-232	Use "Generic: TCP Serial Port"	N/A
VR-6HD	LAN	Use "Generic: TCP Serial Port"	N/A
VR-50HD	RS-232	Use "Generic: TCP Serial Port"	N/A
VR-50HD MK II	LAN	Yes	2.0
VR-120HD	LAN	Yes	3.0
VR-400UHD	LAN	Use "Generic: TCP Serial Port"	N/A
VP-42H	LAN	Yes	2.0
XS-1HD	RS-232	Use "Generic: TCP Serial Port"	N/A
XS-42H	LAN	Yes	2.0
XS-62S	LAN	Yes	2.0
XS-82H, XS-83H, XS-84H	LAN	Use "XS-84H"	2.0

 

Generic TCP Serial Port Module Setup:

• First set the target IP address of the Roland module or Generic TCP module to match the local IP of the computer on your network that is hosting the RS-232 serial connection.
• More tips are available by clicking on the question mark icon next to the "Generic: TCP Serial Port" module listing in Companion.

 

Models with Network Passwords using the Generic Module:

VR-6HD and VR-400UHD require a network password and do not have a dedicated Companion module yet, so there are additional commands needed to successfully control them:

• Each command consists of two to 3 actions with LF returns
• In these Examples, the network password is 0000
  
  
• VR-6HD: 
  • In this example, the network password is "0000":
    • Press Action - Send Command: 0000
    • Press Action - Send Command: DTH:000C01,01; (PinP&Key 1 PGM button on)
  • Button commands on the VR-6HD require that you add a release action, otherwise it remains virtually pressed:
    • Release Action - Send Command: DTH:000C01,00; (PinP&Key 1 PGM button off)
• VR-400UHD: 
  • In this example, the network password is "0000":
    • Press Action - Send Command: 0000
    • Press Action - Send Command: set,98,43,0,1 (CUT button on and off)