VC-1-DL System Program Version 1.23.22
This is the software to make your VC-1-DL up-to-date.
Use the latest version of VC-1 RCS
Before you start, make sure that the version of VC-1 RCS you're using is the most recent.
How to tell the version
Please check the version of the system working on your VC-1-DL before downloading the archive file.
- Download and install appropriate VC-1 RCS for Windows or VC-1 RCS for Mac OS X onto your personal computer in advance.
- Start VC-1 RCS.
- Power on your VC-1-DL and connect it to the personal computer with a USB cable.
- Click the [ Update ] button at upper-right on VC-1 RCS to open the "Update" dialog box.
- Check the version number displayed in "Now Version".
Update history
[ Version 1.23.22 ]
Bug Fix
The following bug was fixed.
[ Version 1.22.21 ]
Bug Fix
The following bug was fixed.
[ Version 1.21.21 ]
Functionality Improvements
The following bugs were fixed.
[ Version 1.20.20 ]
Additional Function
The following bugs were fixed.
[ Version 1.10.10 ]
Specification change
The following bugs were fixed.
Bug Fix
The following bug was fixed.
- SDI signal output contains audio noise.
[ Version 1.22.21 ]
Bug Fix
The following bug was fixed.
- The problem of an HD output signal from HDMI output being displayed at 4:3 despite being a 16:9 signal was corrected.
[ Version 1.21.21 ]
Functionality Improvements
- Analog audio output is muted during times when no video signal is input.
The following bugs were fixed.
- In rare cases, interruption of input occurs on 3G-SDI input.
- Noise artifacts sometimes occur in the audio of SDI input when REF IN is input or the freerun function is turned on.
- When MODE SW10 is turned off while the freerun function is on, the freerun function sometimes remains on.
- In rare cases, video is not input when a signal is input from the matrix switcher.
- The audio of SDI output is always output 16 channels and silent audio data is output on unused channels.
[ Version 1.20.20 ]
Additional Function
- The free run function was added.
- The reference signal for the horizontal position of HDMI input signals is changed from Hsync to DE.
The following bugs were fixed.
- When audio data is embedded into a channel, noise is sometimes produced in other audio channels.
- Available data is sometimes not input to the channel status of the audio data.
[ Version 1.10.10 ]
Specification change
- The initial value of the HDCP Key Mask parameter was changed so that VC-1 operates as an HDCP-incompatible device with the default setting.
- Among the audio formats of HDMI output, the two-channel format was supported.
- Resistance to jitter of HDMI input terminals was improved.
The following bugs were fixed.
- The SDI audio is sometimes not properly received by some commercial devices.
- When an unsupported format is input and then a supported format is input, the image is sometimes not displayed.
What you will need to update your VC-1-DL
- VC-1-DL
- A computer installed with one of the following operating systems under which VC-1 RCS is operating
Important
The update cannot be performed under Microsoft(R) Windows(R) 8.1.
When updating VC-1-DL, perform the update using a computer installed with one of the following operating systems. (2015/12/07)
- Microsoft(R) Windows(R) 10
- Microsoft(R) Windows(R) 8
- Microsoft(R) Windows(R) 7
- Microsoft(R) Windows Vista(R) SP1 以上
- Microsoft(R) Windows(R) XP SP3 以上
- Mac OS X v10.7 / OS X v10.8 / OS X v10.9 / OS X v10.10 / OS X v10.11
- USB cable
- VC-1 RCS for Windows or VC-1 RCS for Mac OS X
Caution when performing the update
- Never apply this update data to any product other than the VC-1-DL. This update data may destroy the data or system program of other products.
- Never power-off your VC-1-DL while the update is in progress!
If a power failure or similar accident occurs during the update process, the VC-1-DL won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs. - We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.
Getting the update file
Please open/extract the downloaded " vc1dl_sys_v12322.zip " file on your computer to get the update files in the " vc1dl_sys_v12322 " folder.
Procedure for the update
Caution
- You must not rename the extracted files.
- Never turn off the VC-1-DL's power while the update is in progress. Otherwise the system program or the VC-1-DL itself may be destroyed.
Please install the extracted system program files into your VC-1-DL according to the following procedure.
- Install VC-1 RCS into a Windows PC or a Mac.
- Start VC-1 RCS.
- Power on your VC-1-DL and connect it to a Windows personal computer or a Mac computer with a USB cable.
* When updating multiple VC-1-DL units, do not connect them to your personal computer together. - Click the [ Update ] button at upper-right on VC-1 RCS to open the "Update" dialog box.
- Click the [ Bin File ] button to select " VC-1-DL_ALL012322.bin " in the personal computer.
* Dragging and dropping "VC-1-DL_ALL012322.bin" into the "Update" dialog box are also available. - Click the [ Update ] button.
* It will take approximately two minutes. - When "Please Reboot Device!!!" is displayed on the right of the [ Update ] button, the update is completed.
- Power on your VC-1-DL again.
- Check that "Complete." is displayed on the right of the [ Update ] button and then click [ OK ].
- Power off your VC-1-DL and exit VC-1 RCS to complete the update.
* The update may fail due to a communication failure or contact failure. In such a case, click the [ Cancel ] button to close the "Update" dialog box, and then perform all the steps again from 3.