---

Important Notice For the upgrade from the V-800HD MK II of earlier than version 1.50, the memory is not preserved. At the first booting after update, factory reset is executed automatically. * For the upgrade from the V-800HD MK II of version 1.50 or later, the memory is preserved.

---

HOW TO KNOW THE VERSION

---

UPDATE HISTORY
[ Ver.1.51 ] NOV 2019
Bug Fixes
The following bugs were fixed.

• When the unit is restarted while the Output Fade Mode is set to "Output Freeze," the still image fails to be loaded correctly at startup.
• The color of DVI-D/HDMI input sometimes has blown-out highlights.
• When changing the PGM/PVW assignment during Multiview Output, executing Output Freeze or Output Capture returns the PGM/PVW assignment to its default setting.
• When changing the PGM/PVW assignment during Multiview Output, the test pattern Frame (PVW) setting is displayed in the PGM section.

Functionality Improvement

• Test Pattern display response has been improved.

[ Ver.1.50 ] MAR 2019
Additional Functions

• A parameter was added for swapping the PGM and PVW positions in multi-view output.
  You can use System > Multiview PGM Position to swap the positions.
• It is now possible to select the signal sent to the AUX bus when the [AUX 10] button is selected.
  You can use System > AUX10 Key Assign to make the setting.
  
  Crosspoint10 : Background or Still image (default) is sent to AUX output.
  Mixer Output : Mixer output is sent to AUX output.
  
  * Selecting AUX10 while set to Mixer Output makes the [AUX 10] button light up in yellow.
  * When AUX10 Key Assign is set to Mixer Output, "DSK/External Key" is disabled.
  

Functionality Improvements

• The adjustment unit has been changed from "1%" steps to "0.1%" steps.
  Affected parameters:
  
  • Input > Scaling Zoom
  • Output > Main > Scaling Zoom
  • PinP > PinP Size
  • PinP > PinP Position H
  • PinP > PinP Position V
  • PinP > View Zoom
  * The movement when using the [POSITION] joystick to adjust position has been slowed down. Holding down the [ENTER] button and operating the [POSITION] joystick achieves movement at the same speed as heretofore.
  * For Output > RGB/Component and for SD > Scaling > Zoom, the unit of adjustment is unchanged from the existing "1%" steps.
  
• The unit of adjustment has been changed from "%" to "Dot" steps.
  Affected parameters:
  
  • PinP > View Position H
  • PinP > View Position V
• A total of 15 types of test patterns have been added.
  You can use System > Test Pattern to set this.
• Switching AUX source via external control is now supported.
  You can use the [stx]AUX;a; command to change the value of AUX Source.
  a = 0(Mixer Input), 1(Mixer Output), 2(DSK Source), 3(DSK Output), 4(Input Ch.1), 5(Input Ch.2) ... 13(Input Ch.10)
  * When DSK/DSK PVW is set to ON, or when in the External Key mode, settings for Input Ch.1(4) through Input Ch.10(13) cannot be made.
  

[ Ver.1.04 ] SEP 2018
Bug Fixes
The following bugs were fixed.

• When Wipe Pattern Direction is set to Reverse and the PGM/PST channel is changed while the T-bar is stopped partway through its stroke, the channel fails to change correctly.
• When the Wipe Pattern is changed while the T-bar is stopped partway through its stroke, the change fails to be applied immediately.

[ Ver.1.03 ] JUN 2018
Bug Fixes
The following bugs were fixed.

• The video picture sometimes fails to display on some monitors connected to the HDMI OUT connector (MULTI-VIEW).
• Multi-view labels sometimes fail to display correctly.

[ Ver.1.02 ] SEP 2017
Bug Fix
The following bug was fixed.

• The problem was again corrected in which depending on the usage environment, horizontal-line noise sometimes occurs on the multi-view SDI-input monitor screen.

[ Ver.1.01 ] JUL 2017
Bug Fix
The following bug was fixed.

• Depending on the usage environment, horizontal-line noise sometimes occurs on the multi-view SDI-input monitor screen.

---

WHAT YOU WILL NEED TO UPDATE

• V-800HD MK II
• USB Memory
  * Before you start, use a computer to format the device using the FAT32 file system.

---

GETTING THE UPDATE FILE

---

CAUTION WHEN PERFORMING THE UPDATE

• Never apply this update data to any product other than the V-800HD MK II. This update data may destroy the data or system program of other products.
• Never power-off your V-800HD MK II while the update is in progress!
  If a power failure or similar accident occurs during the update process, the V-800HD MK II won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
• We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

---

PROCEDURE FOR THE UPDATE

---