V-600UHD System Program (Ver.3.00)
HOW TO TELL THE VERSION
Please check the version of the system working on your V-600UHD before downloading the archive file.
- Connect a monitor to the MULTI-VIEW connector.
The menu appears on the monitor connected to MULTI-VIEW. - Turn on the power to the V-600UHD.
- Press [MENU] to invoke the Root Menu screen.
- Turn the [VALUE] knob to choose System, and then press the [VALUE] knob.
- Turn the [VALUE] knob to display Version.
The version information screen appears.
VERSION HISTORY
[ Ver.3.00 ] FEB 2024
Additional Functions
- Support for the following resolutions and frame rates on HDMI inputs have been added. 720p: 1280 x 720p, 60 Hz
1080i: 1920 x 1080i, 60 Hz
1080p: 1920 x 1080p, 23.98/24/25/29.97/100/119.88/120 Hz
2160p (UHD): 3840 x 2160p, 23.98/25/29.97 Hz
2160p (DCI): 4096 x 2160p, 23.98/25/29.97 Hz
1280x800 (WXGA): 60 Hz
2560x1440 (WQHD): 60/120 Hz (Reduced blanking) - The following values have been added to the EDID paramater of the HDMI input. 2160p(DCI) 23/24Hz, 2160p(DCI) 25Hz, 2160p(DCI) 29/30Hz, 2160p(DCI) 50Hz, 2160p(DCI) 59/60Hz
2160p(UHD) 23/24Hz, 2160p(UHD) 25Hz, 2160p(UHD) 29/30Hz, 2160p(UHD) 50Hz, 2160p(UHD) 59/60Hz
1080p 23/24Hz, 1080p 25Hz, 1080p 29/30Hz, 1080p 50Hz, 1080p 59/60Hz
2560x1440/60Hz, 1400x1050/60Hz, 1280x1024/60Hz, 1280x800/60Hz, 1024x768/60Hz
1080p 100Hz, 1080p 120Hz, 2560x1440/120Hz
2160p(DCI) 50Hz (420), 2160p(DCI) 59/60Hz (420), 2160p(UHD) 50Hz (420), 2160p(UHD) 59/60Hz (420) - Support for the following resolutions and frame rates on SDI inputs have been added. 720p: 1280 x 720p, 50/59.94/60 Hz
1080i: 1920 x 1080i, 60 Hz
1080p: 1920 x 1080p, 23.98/24/25/29.97/30/60 Hz
1080p (2K DCI): 2048 x 1080p, 23.98/24/25/29.97/30/47.95/48/50/59.94/60 Hz
2160p (UHD): 3840 x 2160p, 23.98/24/25/29.97/30/60 Hz
2160p (DCI): 4096 x 2160p, 23.98/24/25/29.97/30/47.95/48/60 Hz - Support for the following frame rates on HDMI outputs have been added. 1920 x 1080 (FHD): 50/59.94 Hz
1920 x 1080 (FHD): 23.98/24/25/29.97/50/59.94 Hz (Available when Down Convert is set to “FHD”)
3840 x 2160 (UHD): 23.98/24/25/29.97/50/59.94 Hz
4096 x 2160 (DCI): 23.98/24/25/29.97/50/59.94 Hz - YCbCr 4:2:0 down sampling function added to HDMI 4K output.
Available when the setting System menu → Processing → Format is 2160p(UHD), 2160p(DCI), 3840x2160 or 4096x2160.
YCbCr 4:2:0 down sampling function and FHD down convert function cannot be used at the same time. - Added function to change the bus selection of HDMI outputs by the USER button.
Example: You can set up USER button 1 to change HDMI output 2 from PGM to AUX output. - Added Composition/DSK source display to the Status Bar on the MULTI-VIEW.
Also, the position of the Status Bar can be selected as Upper/Lower. - HDCP on the MULTI-VIEW output is now linked with the system setting.
- Added detailed information on the video signal to the signal status display of the input channel.
- Added Password for LAN command control and WebRCS function.
Bug Fixes
- Fix some bugs in the display of WebRCS.
[ Ver.2.04 ] SEP 2023
- Internal processing has been improved.
* There is no change affecting the product specification.
[ Ver.2.03 ] FEB 2022
Bug Fix
The following bug was fixed.
The following bug was fixed.
- Camera Remote Control sometimes becomes impossible when using some PTZ cameras.
[ Ver.2.02 ] AUG 2021
Bug Fixes
- Fixed issue that PGM/PVW switching doesn’t work when receiving unsupported signals.
- The recall memory control and tally lamp control of PTZ cameras works properly.
[ Ver.2.01 ] DEC 2020
Bug Fixes
- Fixed issues when using 3840x2160/50Hz and 3840x2160/30Hz signals from HDMI IN.
- The tally lamp control of SONY and Panasonic PTZ cameras works properly.
[ Ver.2.00 ] AUG 2020
Additional Functions
- Added new “Automatic ROI” function, which uses facial recognition information from compatible Canon camcorders to control the ROI (Region of Interest) function of the V-600UHD.
For information on supported video cameras, check “V-600UHD Ver.2.0 Camera Remote Control Compatibility Information.” - Added network control for Canon and JVC camcorders, as well as PTZ cameras from JVC, Panasonic, PTZOptics, Avonic, and PTZ cameras that support VISCA over IP (such as SONY PTZ cameras).
For information on supported cameras, check “V-600UHD Ver.2.0 Camera Remote Control Compatibility Information.” - Added settings for the Multi-View monitor output labels: Turning display on or off. Changing position, size and background transparency.
- Added a Status Bar to display signal status and AUX source selection on the Multi-View monitor output.
- Added Recall Safe function that helps you recall only specified settings with memory presets.
- Added the function to specify the memory to load during boot.
- Added Panel Lock function to help prevent operation mistakes.
- Added additional functions to the USER buttons: Turning display on or off the Status Bar on the Multi-View monitor. Changing Still Image selection.
- Redesigned the Setup Menu.
Bug Fix
- Fixed an issue when adjusting the ROI position with the POSITION stick when the Input Scaler Zoom was greater than 100%.
[ Ver.1.11 ] FEB 2020
Bug Fixes
- Audio follow function works properly.
- When recalling a memory, the parameters of key composition is now set correctly.
- When changing the cross-point assignment from “Blank” or “None” to an input channel whose video source is set to “STILL1” or “PG/STILL2”, the color is now displayed correctly on the multi-view monitor.
Additional Functions
- The option of also loading still images when loading a settings file has been added.
Functionality Improvements
- Improved way for determining SDR or HDR on SDI inputs.
- The state of button such as output fade, output freeze, etc. are now initialized during a Factory Reset.
- “Processing...” message is displayed during system configuration after Factory Reset or after loading an unit’s setting file.
- Located in the file list display of the unit’s setting files and the still image files, the name scrolls when the file name is long.
[ Ver.1.10 ] DEC 2019
Additional Functions
- A function for capturing a still image from the final output video (PGM or PVW) has been added.
Captured still images can be stored on a USB flash drive and loaded from the USB flash drive during boot.
* Still images captured from copyright protected (HDCP) video cannot be stored on a USB flash drive. - The number of still images that can be loaded from a USB flash drive was increased from 2 to 8.
You can load or capture up to 8 still images. And you can choose from 8 still images as the source for Ch.7 (STILL1) or Ch.8 (STILL2). - PNG has been added as a file format that can be imported via a USB flash drive.
* The alpha channel of PNG files cannot be imported. - A function for freezing the final output video (PGM) has been added.
- Support for the following output formats on HDMI outputs have been added. 1920 x 1080/30 Hz (FHD)
3840 x 2160/30 Hz (UHD 4K)
4096 x 2160/30 Hz (DCI 4K)
* 1920 x 1080/30 Hz is available when the Down Convert for HDMI OUT 1-3 is set to “Enabled”. - Support for the following resolutions and frame rates on HDMI inputs have been added. 720/50p, 720/59.94p
1024 x 768/60 Hz (XGA)
1280 x 768/60 Hz (WXGA)
1280 x 1024/60 Hz (SXGA)
1400 x 1050/60 Hz (SXGA+)
1600 x 1200/60 Hz (UXGA)
1920 x 1080/30 Hz (FHD)
3840 x 2160/24 Hz (UHD 4K)
4096 x 2160/24 Hz (DCI 4K) - A function for selecting the EDID setting for HDMI inputs has been added.
- Added SDI input function that determines if source is SDR or HDR, based on SDI Video Payload ID.
Added SDI output parameter to set the Video Payload ID. - Parameters for changing the display and color of ROI border shown on the Multi-View screen have been added.
- In the Input Scaling menu, functions for adjusting ROI size to FHD and resetting parameters have been added.
- 1k stereo test tone output has been added. (L:1k + R:1k)
- A function for erasing individual stored MEMORY settings has been added.
- A function for erasing imported still images and captured still images has been added.
Functionality Improvements
- Automatically recall the position of the AUDIO OUTPUT knob at startup and after Factory Reset.
- Improved processing with 1080/50i and 1080/59.94i inputs.
- Adjusted synchronization timing When Reference Source is “SDI IN5”.
[ Ver.1.08 ] SEP 2019
Bug Fix
- The problem of the V-600UHD experiencing a system lockup in extremely rare cases was corrected.
[ Ver.1.07 ] AUG 2019
Additional Functions
The following functions have been added.
The following functions have been added.
- SDI OUT 3G Level B output.
- Functions that use the RS-232 connector and LAN port. (LAN/RS-232 command and WebRCS)
- SDI IN audio functionality.
[ Ver.1.06 ] JUL 2019
Functionality Improvements
- The stability of HDMI and SDI input and output has been improved.
- The display of signal status when a Mac computer is connected has been improved.
[ Ver.1.05 ] JUL 2019
Bug Fix
- The possibility that in extremely rare cases signals to HDMI IN might fail to be received correctly has been circumvented.
Items to prepare for the update
Following items are required to perform the update.
- V-600UHD itself
- Video Monitor (equipped with a HDMI input connector)
- HDMI cable
- PC to write the updater to the USB Flash Memory
- USB Flash Memory
* If the V-600UHD does not recognize the USB flash memory, try using a different USB memory.
CAUTION WHEN PERFORMING THE UPDATE
- Never apply this update data to any product other than the V-600UHD. This update data may destroy the data or system program of other products.
- Never power-off your V-600UHD while the update is in progress!
If a power failure or similar accident occurs during the update process, the V-600UHD won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs. - We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.
HOW TO DOWNLOAD AND EXPAND THE ARCHIVE FILE
Download the file named “v600uhd_sys_v300.zip”.
The downloaded file is an archive file in zip format.Right-click to select Extract All, and then follow the instructions.
After expanding the file, the folder “v600uhd_sys_v300” holding the files “V600UHD.PRG” and “V600UHD_NET.PRG” will be appeared.
The downloaded file is an archive file in zip format.Right-click to select Extract All, and then follow the instructions.
After expanding the file, the folder “v600uhd_sys_v300” holding the files “V600UHD.PRG” and “V600UHD_NET.PRG” will be appeared.
HOW TO UPDATE
Please install the system program “V600UHD.PRG” and “V600UHD_NET.PRG” to the V-600UHD by following the process below.
* While updating the unit, have a monitor connected to the MULTI-VIEW connector.
Important notice: Never turn the V-600UHD off during the update process, or V-600UHD won’t reboot correctly any more.
- Copy the update-use file (“V600UHD.PRG” and “V600UHD_NET.PRG”) inside the v600uhd_sys_v300 folder to the root directory of the USB Flash Memory.
- While the power to the V-600UHD is turned off, connect the USB flash drive to the USB MEMORY port.
- Hold down MODE [AUX/COMPOSITION] button, MODE [DSK] button, and WIPE PATTERN [MIX] button and turn on the power.
* Continue to hold down the buttons until “UPDATE” appears on the monitor. - Pressing the [ENTER] button starts the update.
When the update is complete, the message “Completed!” appears on the monitor. - Turn off the power to the V-600UHD and detach the USB flash drive.
- Refer to “HOW TO TELL THE VERSION” and confirm that the version has been updated to show “3.00 b000.”