UVC-02 Setup Tool Ver.2.0.0 for Windows
UPDATE HISTORY
[Ver.2.0.0] NOV 2022
Additional Function
- Improved NOISE SUPPRESSOR for MIC and HEADSET MIC inputs
- New NOISE SUPPRESSOR type added.
- When using the new NOISE SUPPRESSOR method, select “ADAPTIVE” from TYPE.
- When using the conventional NOISE SUPPRESSOR, select “NORMAL” from TYPE.
- Improved A1/A2 buttons
- “SLIDESHOW PREV.” and “SLIDESHOW NEXT” can now be assigned to both buttons.
Bug Fixes
- Fixed 1080/25p support
- Fixed PRESET write problem for SFX1/SFX2
- Fixed typographical errors
DOWNLOADING AND UNARCHIVING THE COMPRESSED FILE
- Read the software license agreement at the bottom of the screen and select the “I agree” check box.
- Click the “Download” button to download the system program (uvc02_setup_tool_w200.zip).
- Right-click the file and select “Extract All,” then click "Extract".
- “uvc02_setup_tool_w200” folder appears.
HOW TO INSTALL
- Open the “uvc02_setup_tool_w200” folder.
- Double-click “UVC-02_Setup_Tool_Installer.exe”.
The installer starts. - Follow the on-screen instructions to install.
PROCEDURE FOR UPDATING SYSTEM PROGRAM
Use the UVC-02 Setup Tool software to update the UVC-02 hardware's system program.
When you connect a UVC-02 with an older version to your computer, the update screen pops up.
When you connect a UVC-02 with an older version to your computer, the update screen pops up.
NOTE: Applying this update changes NOISE SUPPRESSOR to the following settings; if you wish to restore the setting values, including NOISE SUPPRESSOR, please perform FILE EXPORT before updating.
- TYPE: ADAPTIVE
- LEVEL: 7
Follow the steps below to update.
- Connect the UVC-02 to a computer with the included USB cable.
The UVC-02 Setup Tool starts automatically. - If the message “Version mismatch” appears, click the “UPDATE”.
The pre-update settings are automatically backed up. - When the confirmation screen for updating the version appears, click “OK”.
The update starts.
-Never disconnect the USB cable while the update is in progress.
-It takes approximately 2 minutes. - When “Firmware Update Complete./100%” appears and the [AUDIO OUT]/[TALK]/[VIDEO OUT] buttons are all lit blue, reconnect the USB cable.
- When “Restore Setting” appears, click “YES”.
The settings you backed up before the update are restored.
ADDITIONAL INFORMATION
This application starts automatically when the computer is turned on and resides in the task tray.
SYSTEM REQUIREMENTS
OPERATING SYSTEM
Microsoft(R) Windows(R) 10 or later
*Operation of this app on a standard computer that satisfies the conditions just described has been confirmed, but all operation under these conditions is not assured. Please be aware that even under identical conditions, computer-specific differences in design specifications or usage environment might result in differences in processing capacity.
*Microsoft and Windows are registered trademarks of Microsoft Corporation.
*All product names mentioned in this document are trademarks or registered trademarks of their respective owners.
*The contents of the files are subject to change without notice for improvement of the program.
*Microsoft and Windows are registered trademarks of Microsoft Corporation.
*All product names mentioned in this document are trademarks or registered trademarks of their respective owners.
*The contents of the files are subject to change without notice for improvement of the program.