---

VERSION HISTORY  

---

WHAT YOU WILL NEED TO UPDATE YOUR UVC-01

• UVC-01 itself
• A computer (Mac only) with a USB connector.
• USB 3.0 cable
  * The update is carried out with the unit and the computer connected via USB.
  Provide a cable suitable for connection to the computer you're using.

---

CAUTIONS WITH THE UPDATE

• Never apply this update data to any product other than the UVC-01. This update data may destroy the data or system program of other products.
• Never power-off your UVC-01 while the update is in progress!
  If a power failure or similar accident occurs during the update process, the UVC-01 won't be able to start up in normal operating mode.
  This will require servicing, so you will need to contact Roland service center near you if this occurs.
• We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

---

GETTING THE UPDATE FILE

---

PROCEDURE FOR THE UPDATE
Caution

• You must not rename the extracted file.
• Never turn off the UVC-01's power while the update is in progress. Otherwise the system program or the UVC-01 itself may be destroyed.

Please install the extracted system program file into your UVC-01 according to the following procedure.
 

1. Connect the computer to the UVC-01's USB port by a USB 3.0 cable.
2. Double-click UVC-01_Updater to start it.
   * If a warning from an antivirus program is displayed, grant permission.
3. Make the input selection for audio.
   At "Audio Input," select the audio to input.
   • HDMI: Only audio from HDMI IN is input.
   • AUX: Only audio from AUX is input.
   • HDMI+AUX: Audio from both HDMI and AUX is input (factory default).
4. Click [ Update Firmware ] to carry out the update.
5. When the message "Firmware update completed." appears, the update has finished.
   Click [ Close ].
6. Quit the application.

---