[ Ver.2.400 ]

• Support for the S-2416 was added.
  Note: On the S-2416, the USB port can also be used for control via S-4000 RCS for Windows. When using a USB connection, then before you start, use the S-2416 INF File Installer (s2416_inf_inst.zip) to install the INF file. For details on the installation method and other matters, refer to the readme_e.txt file inside s2416_inf_inst.zip.
• A function for switching the sample rate for an existing Digital Snake device was added.
• When the unit was rapidly switched at M-48 List while the setting for Engineer Monitor was made in the M-48 Manager window, in rare cases, the unit was rewritten with an unintended value; this problem was corrected.

[ Ver.2.300 ]

• You can open the M-48 Source Lev/Pan window and the M-48 Source Assign window simultaneously.
• You can resize the following windows:
  
  • S-4000 RCS window
  • M-48 Source Lev/Pan window
  • M-48 Source Assign window
  • S-4000M Merge Patchbay window
  • S-4000M Output Patchbay window
• When you edit a channel name in the following windows, you can use [Tab] key of your computer's keyboard to switch to the forward or backward channel.
  
  • S-4000 RCS window (channel names)
  • M-48 Manager window (group names)
  • M-48 Source Lev / Pan window (channel names)
  • M-48 Source Assign window (group names)
  • S-4000M Merge Patchbay window (channel names)
• When you right-click a group name in the M-48 Manager window, a popup window to select a channel assigned to the group will appear.

[ Ver.2.201 ]

• It was corrected that S-4000RCS could not memorize a setting of the "Engineer's Monitor Option：Monitor-only" in the "M-48 Preferences" window for an M-48 designated as the Engineer's Monitor unit.

[ Ver.2.200 ]

• Compatible with the S-MADI.
• Engineer’s Monitor function has been added.
• M-48 mix option has been added.

Double click downloaded "s4000rcs_w2400.zip".

The contents of the files are subject to change without notice for improvement of the program.

Microsoft(R) Windows(R) 10
Microsoft(R) Windows(R) 8.1 32-bit Edition
Microsoft(R) Windows(R) 8.1 64-bit Edition
Microsoft(R) Windows(R) 8 32-bit Edition
Microsoft(R) Windows(R) 8 64-bit Edition
Microsoft(R) Windows(R) 7 32-bit Edition
Microsoft(R) Windows(R) 7 64-bit Edition
Microsoft(R) Windows Vista(R) SP1 or later
Microsoft(R) Windows(R) XP Home Edition SP2 or later
Microsoft(R) Windows(R) XP Professional SP2 or later

* S-4000 RCS does not work with the 64-bit Edition of Windows(R) XP
* S-4000 RCS does not work with the 64-bit Edition of Windows Vista(R)
* S-4000 RCS does not work with Microsoft(R) Windows(R) XP Media Center Edition.

Pentium(R) / Celeron(R) or compatible processor, 1.6GHz or faster
* We cannot make guarantees regarding the compatibility of processors.

512MB or more

1024 x 768 (XGA) or higher, 65,536 colors (16-bit color) or higher

Serial Interface (RS-232C D - Sub 9 pins)
* Check that the serial interface of your computer works properly.

Connect USB/serial conversion cable or conversion adaptor to your computer and carry out installation to make all the serial interfaces work properly.

Using a combination of USB/serial conversion cables and conversion adaptors from various manufacturers may make the system unstable.
Please do not use this product with such configurations.

* Microsoft and Windows are registered trademarks of Microsoft Corporation.
* Pentium and Celeron are registered trademark of Intel Corporation.
* All product names mentioned in this document are trademarks or registered trademarks of their respective owners