---

Please refer to the attached document "Process to update the Digital Snake unit" ( S-4000M_update_e1.pdf ) for more information such as the update procedure.

---

Checking the version number

---

Update history
[ Ver.1.004 ] JUL 2016
The following bug was fixed.

• The problem was corrected that when "MUTE ALL OUT" is being executed on a master device connected to port A of the S-4000M and the power to only the master device is reset, the "MUTE ALL OUT" setting of any REAC devices connects to ports 1 through 4 of the S-4000M remains set to "On."

[ Ver.1.003 ]
The following bugs were fixed.

• It was corrected that when you removed a REAC equipment connected with S-4000M after executing the "MUTE ALL OUTPUT" command on it, you could not clear mute settings of other REAC equipments connected with S-4000M.
• When both R-1000 and M-48 are connected with the REAC Port A of S-4000M, a noise might occur on the audio signal streaming from S-4000M to R-1000.

---

What you will need to update your S-4000M
The following products/devices are necessary to carry out the update process.

• S-4000M unit
• S-4000 RCS software (Ver. 2.1 or later)
• Windows PC equipped with serial (RS-232C) port and can run S-4000 RCS software properly.
• Serial cable (The remote cable contained as part of S-4000R accessory or ordinary sold RS-232C cable : D-Sub 9pins, male-female, straight type)

---

Getting the update file

---