S-4000 RCS Ver.2.400 for MacOS X

S-4000 RCS is an application that lets you manage and perform setup of the Digital Snake system from your computer.
S-4000 RCS is able to edit and manage up to four Digital Snake systems.

Please refer to the "S-4000 RCS Version 2.4 User Guide"(S-4000RCS_v24_e01.pdf) file for details.

[ Ver.2.400 ]
  • Support for the S-2416 was added.
    With the S-2416, the USB port can also be used for control via S-4000 RCS for Mac. When using a USB connection, use can be enabled simply by establishing a USB connection between the S-2416 and the Mac.
  • A function for switching the sample rate for an existing Digital Snake device was added.
  • When the unit was rapidly switched at M-48 List while the setting for Engineer Monitor was made in the M-48 Manager window, in rare cases, the unit was rewritten with an unintended value; this problem was corrected.
[ Ver.2.301 ]
  • When an operation target unit is switched in the M-48 List while S-4000 RCS is operated in OS X v10.8 (Mountain Lion), the switching is not reflected to the display of the M-48 Source Assign window.
[ Ver.2.300 ]
  • Supported OS X v10.8.
  • You can open the M-48 Source Lev/Pan window and the M-48 Source Assign window simultaneously.
  • You can resize the following windows:
    • S-4000 RCS window
    • M-48 Source Lev/Pan window
    • M-48 Source Assign window
    • S-4000M Merge Patchbay window
    • S-4000M Output Patchbay window
  • When you edit a channel name in the following windows, you can use [Tab] key of your computer's keyboard to switch to the forward or backward channel.
    • S-4000 RCS window (channel names)
    • M-48 Manager window (group names)
    • M-48 Source Lev / Pan window (channel names)
    • M-48 Source Assign window (group names)
    • S-4000M Merge Patchbay window (channel names)
  • When you right-click a group name in the M-48 Manager window, a popup window to select a channel assigned to the group will appear.
[ Ver.2.201 ]
  • Expanded the functions the same as "S-4000 RCS Ver.2.201 for Windows".
  • Expanded the compatible products the same as "S-4000 RCS for Windows".
  • Changed the System Requirements.

Download the file named "".
It is an archive file in zip format, please double click on the file to expand. After expanding the file, "S-4000" will be appeared.

Copy the "s4000_rcs_m2400" folder to the drive of your computer.

In the "s4000_rcs_m2400" folder, double-click "S-4000".

[ When you use on OS X Mountain Lion (10.8) ]
Perform the following procedure after expanding.
* This is required only on the first operation.
  1. Click the icon while pushing the [control] key.
  2. Select the [Open] from the displayed menu.
  3. Click the [Open] button after the message to confirm the execution is displayed.

The contents of the files are subject to change without notice for improvement of the program.

Mac OS X v10.5.8 or later / v10.6 / v10.7 / OS X v10.8 / OS X v10.9 / OS X v10.10 / OS X v10.11

Apple Mac series computer with on-board USB
* Macintosh computers running Microsoft Windows are not supported.

Intel Processor

1 GB or more

1024 x 768 or higher, 65,536 colors or higher

Serial Interface (RS-232C D-Sub 9pins)

* Check that the serial interface of your computer works properly.
Recommendation (as of February 1st 2012): KEYSPAN USA-49W, USA-19HS

[ Warning ]
Using a combination of USB/serial conversion cables and conversion adaptors from various manufacturers may make the system unstable.
Please do not use this product with such configurations.

* This software has been found to work on typical computers that meet the above requirements, but we do not guarantee that it will operate on all such computers. Please be aware that differences in design or conditions of use may produce differences in the processing power of otherwise similar computers.

* Apple and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
* All product names mentioned in this document are trademarks or registered trademarks of their respective owners.


Quick Links