The V-160HD features seven types of video buses. You can respectively assign the video bus you like to the HDMI OUT 1-3 and SDI OUT 1-3 connectors as well as the USB STREAM port.

Follow the steps below.

1. [MENU] button -> “VIDEO ASSIGN” -> select “HDMI OUT 1–3,” “SDI OUT 1–3” or “USB OUT” and press the [VALUE] knob.
2. Use the [VALUE] knob to select the output bus.
   

   Video bus	Explanation
   PROGRAM	Final output video
   SUB PROGRAM	Same video as the PROGRAM bus The SUB PROGRAM bus lets you set whether to display or hide the PinP & key layers and the DSK layers, separately from the PROGRAM bus. You can edit the layer settings to output a different video from that of the PROGRAM bus.
   PREVIEW	Preview output video (the video to be output next) * The fade-in/out effect (p. 26) is not reflected here.
   AUX	Video of your choice sent to the AUX bus This lets you allocate a separate output that is independent of the final output, such as when you want a specific input video to be a fixed output.
   MULTI-VIEW	The final output video, preview output video and the videos allocated to the cross-point [1]–[8] buttons (multi-view)
   16 INPUT-VIEW	The input video from the HDMI IN and SDI IN connectors (shown as 16 separate sections on the screen)
   16 STILL-VIEW	Still images loaded into the unit (shown as 16 separate sections on the screen)

3. Press the [MENU] button to close the menu.